Home My Blog Making Picture Frames With DIY Framing Tools
My Blog

Making Picture Frames With DIY Framing Tools

Imagine being capable of body your personal pix, prints, tapestries, and art work as well as a expert. Picture framing is honestly pretty a laugh and smooth to DIY. There are five clean steps to framing.

Step 1 – How to Cut Mats

Adding a shade border (the mat) around your paintings complements the image and affords a restful area among the photograph and the photograph frame. The shade and length of the mat board should be decided first, as this may determine the general dimensions of your photo frame. You start via calculating the outside size of the mat.

To cut the mat use an excellent excellent bevel mat cutter and ruler. There are numerous reducing structures to healthy numerous budgets and ability stages, together with the Mat Master Model 660 for the hobbyists, to the Mat Master 860B or 1060B for the keen domestic photograph framer.

Mark the borders to be reduce on the back of the mat board.

Make certain the mat will cover the rims of the paintings, through subtracting approx. 3mm or 1/8″ from the photograph size (period & width). Cut the mat following the instructions in your mat cutter. Attach the image to the mat the usage of 2 small portions of acid free tape on the top aspect simplest.

Step 2 – How to Cut the Picture Frame

How lots photograph frame moulding cloth will I need? Carefully measure the photograph and mat you desire to frame. Add a further (3mm) for “play” to make sure the photo suits without problems into the completed picture frame.

Add the length (L) and width (W) collectively, then multiply the total with the aid of 2 to provide you the overall period. You also must permit for the mitre cuts, so multiply the width (W2) of the moulding via 10 and add this on your general.

(L + W) x 2 + (W2 x 10) = TOTAL

Making the 45 degree mitre reduce in your framing fabric is maximum crucial – your joining will simplest be as accurate as your cutting. Always use a great first-class guide Mitre Saw… We propose the Proman hand noticed which is made in Sweden as the nice in the marketplace. Electric powered Drop Saws are not ideal for cutting small delicate picture frames.

Good Measure System enables to make measuring clean and removes many mistakes. Once you have cut the primary mitre, slide the picture frame cloth alongside to the specified period on the measuring scale, and set the stop. You at the moment are ready to reduce the first 2 portions of your photograph body. Change the settings to reduce the other 2 aspects of the body.

Cutting one facet for a body is simple.

Cutting the second one aspect to be be similar to the primary, is the difficult part. With the FrameCo Ezy-Measure System you may reduce appropriately every time.

Step three – How to Clamp Frames

How do you Clamp the Frame? Clamping the body tightly is important for desirable joining. You can use the a Cord Clamp, or the Steel Strap Clamp to at ease the image frame geared up for becoming a member of.

The gain of the Strap Clamp is that you could see all of the 4 corners of the image body clamped together earlier than joining. So alignment of the corners is easy.

All corners ought to healthy up evenly. Apply a bit wooden glue to all corners of the body for added power. Carefully tension the clamp making sure that the corners are aligned then cozy the clamp tightly.

You are actually geared up for joining.

Step four – How to Join Frames

Most image frames are joined with a V-Nail. This is the easiest method and it’s miles what the professional image framer makes use of. The FrameCo PushMaster becoming a member of device, inserts V-Nails into the corner of the frame. Two V-Nails in each corner is usually all that is essential.

The PushMaster may be used by hand on my own on maximum picture frames, or you can faucet the PushMaster with a mallet if the body is hardwood. The PushMaster can be upgraded to the BenchMaster® if you want to insert V-Nails into the harderst of timbers.

V-nails: How do they paintings?

Upon entry, the sides of the V-Nail are deflected outwards. As it pulls back into its authentic shape, the join is pulled collectively. The little curl on the edge of the V-Nail locks the nail into the grain of the wooden. Glue alone isn’t always enough for robust solid joints, by means of including a V-Nail you obtain a sturdy, tight joint. Which V-Nail size . . . You use a V-Nail approximately 1/2 the frame height.

Sizes are: 7mm – 1/4″, 10mm – 3/eight”, 12mm – half”, 15mm – five/8″

Step 5 – Scale model maker’s cutting mats

Take the empty image body to a tumbler merchant and have them reduce a piece of glass for you. If you want to cut glass your self use an amazing nice oil filled cutter, or the Glass Cutter. Use best 2mm plain or non-reflective glass.

Fome Core is the ideal backing board as it is mild weight, acid loose and easy to reduce. You can also use 3mm MDF or cardboard. Place the empty frame face down and insert the glass, then the matted image and ultimately the backing board.

Use the PushMaster to insert brads or flexipoints into the rear of your image body to maintain the whole thing in area.

Use Backing Nails for massive frames or heavy items. Flexipoints are flexible and ideal for needlework or whilst you need to re move the photo, eg. Image frames.

To seal the artwork within the frame, tape over the brads/flexipoints using a terrific first-rate backing tape. This will prevent dust or insects stepping into the image.

To hold your image, once more use your PushMaster device. Measure one 0.33 down the aspect of the photograph frame from the pinnacle and mark that spot. Place a screw eye into the slot supplied ultimately of the Pushmaster tool, then screw the attention into the frame. Repeat on the other facet and then connect twine from one side to the alternative.

Author

blog-admin

Leave a Reply

Your email address will not be published. Required fields are marked *